Module Toyota Denso Gen4 BENCH-CAN

FID: 444, 473, 493, 494, 507, 508, 571

For Toyota/Lexus petrol vehicles fitted with Denso Gen4 ECUs. Read and write with a direct bench connection over CAN.

Toyota Denso R7F702002 (FID: 444)

Bench support for recent Toyota/Lexus petrol applications using Denso Gen4 hardware. The controller uses a Renesas R7F702002 processor and 8Mb internal flash.

Protocol functions:

- Identification
- Actual reading with a bench connection
- Virtual Reading
- Bench writing with CS-check pass

Seven ECU variants share one FID; the software identifies the type automatically:

• Toyota LC300, Tundra, Lexus LX600 and related models — 3.5 Turbo V35A-FTS
• Toyota Tundra/Sequoia Hybrid — 3.5 Turbo V35A-FTS
• Lexus LS500 — two variants, 3.5 Turbo V35A-FTS
• Known Toyota/Lexus applications — 2.4 Turbo T24A-FTS
• Two variants covering 2.0 M20A-FKS/M20C-FKS, 1.5 M15B-FKS and related engines

Toyota Denso R7F701216 Type 1 (FID: 473)

Bench support for recent Toyota/Lexus applications using Denso Gen4 hardware. The controller uses a Renesas R7F701216 processor and 4Mb internal flash.

The FID covers the following engine and vehicle variants:

• 1.8hyb 2ZRFXE (Corolla, Prius, Voxy, etc)
• 1.5hyb M15AFXS (Yaris Cross, Corolla Cross, Lexus LBX, etc)
• 2.0hyb M20A (Corolla, etc)
• 2.5hyb A25AFXS (Camry, Lexus RX450h+, etc)
• 2.5 2ARFE (Alphard, Vellfire, etc)
• and others...

Toyota Denso R7F701216 Type 2 (FID: 493, 571)

Bench support for recent Toyota/Lexus applications using Denso Gen4 hardware. The controller uses a Renesas R7F701216 processor and 4Mb internal flash.

Support:

• 1.6T G16EGTS GR Yaris 2025+ MCU #0
• 1.6T G16EGTS GR Yaris 2025+ MCU #1

Toyota Denso R7F701216 Type 3 (FID: 494)

Bench support for recent Toyota/Lexus applications using Denso Gen4 hardware. The controller uses a Renesas R7F701216 processor and 4Mb internal flash.

FID supports:

• 2.8TD 1GDFTV Toyota LC250

Toyota Denso R7F701216 Type 4 (FID: 507)

Bench support for recent Toyota/Lexus applications using Denso Gen4 hardware. The controller uses a Renesas R7F701216 processor and 4Mb internal flash.

FID supports:

• 2.7 2TRFE Toyota LC250, HiACE

Toyota Denso R7F701216 Type 5 (FID: 508)

Bench support for recent Toyota/Lexus applications using Denso Gen4 hardware. The controller uses a Renesas R7F701216 processor and 4Mb internal flash.

FID supports:

• 3.3TD F33AFTV Toyota LC300

Treat only currently listed ECU types as supported.

Software activation requires a BitSoftware USB dongle. Enter your existing dongle serial number in the serial number field at checkout.

Technical source: BitBox official module documentation.