Module GM ACDelco Petrol Gen1 CAN

FID: 91, 94, 96, 97, 98, 99, 100, 102

Read and program ACDelco Gen1 controllers in petrol GM vehicles over the OBD2 CAN connection.

GM ACDelco E38 (FID: 96)

Hardware: Motorola MPC561; external memory: 2.0Mb.

CAN operations: read FullFlash and program the calibration area; checksum correction is applied during writing.

Typical read/write time: approximately 3–5 minutes.

GM ACDelco E39 (FID: 100)

Hardware: Motorola MPC5566; internal memory: 3.0Mb.

CAN operations: read FullFlash and program the calibration area; checksum correction is applied during writing.

Typical read/write time: approximately 3–5 minutes.

GM ACDelco E39A (FID: 97)

Hardware: Motorola MPC5566; internal memory: 3.0Mb.

CAN operations: read FullFlash and program the calibration area; checksum correction is applied during writing.

Typical read/write time: approximately 3–5 minutes.

GM ACDelco E67 (FID: 99)

Hardware: Motorola MPC565; external memory: 2.0Mb.

CAN operations: read FullFlash and program the calibration area; checksum correction is applied during writing.

Typical read/write time: approximately 3–5 minutes.

GM ACDelco E78 (FID: 94)

Hardware: Motorola MPC5566; internal memory: 3.0Mb.

CAN operations: read FullFlash and program the calibration area; checksum correction is applied during writing.

Typical read/write time: approximately 3–5 minutes.

GM ACDelco E80 (FID: 102)

Hardware: Motorola MPC5676; internal memory: 6.0Mb.

CAN operations: read FullFlash and program the calibration area; checksum correction is applied during writing.

GM ACDelco E83 (FID: 91)

Hardware: Motorola MPC5565; internal memory: 2.0Mb.

CAN operations: read FullFlash and program the calibration area; checksum correction is applied during writing.

Typical read/write time: approximately 3–5 minutes.

GM ACDelco E92 (FID: 98)

Hardware: NXP SPC5674; internal memory: 4.0Mb.

CAN operations: read FullFlash and program the calibration area; checksum correction is applied during writing.

Typical read/write time: approximately 3–5 minutes.

Activation requires a BitSoftware USB dongle. Enter your existing dongle serial number in the serial number field at checkout.

Technical reference: BitBox official module documentation.